Results 1 to 9 of 9
Thread: Reliable soft starter
-
09-07-2010, 12:34 AM #1
Reliable soft starter
B”H
I would appreciate any help to fine a reliable wash down duty soft starter for 10HP electric motor for 460V. Thank you so much in advance.
-
12-07-2010, 01:25 PM #2
Re: Reliable soft starter
Sorry don't know
Last edited by Crash Pilot; 12-07-2010 at 01:30 PM.
No longer Active
-
14-07-2010, 06:43 AM #3
Re: Reliable soft starter
Danfoss, Aucom, Seimens, Alan Bradley. Fit a parallel contactor as well.
What do you mean, wash down, in a wet enviroment, start with IP 57 ? I think.
-
21-07-2010, 06:45 AM #4
Re: Reliable soft starter
THE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
-
21-07-2010, 01:12 PM #5
Re: Reliable soft starter
Magoo and Goshen thank you so much. Yes it is wet environment (fishing company)B”H
-
22-07-2010, 01:36 AM #6
Re: Reliable soft starter
If water is a problem, remote the soft starter to a drier enviroment, but fit local isolators protection at the pump.
-
22-07-2010, 04:25 AM #7
Re: Reliable soft starter
B"H
Thanks Magoo
-
23-07-2010, 02:03 PM #8
-
23-07-2010, 04:22 PM #9
Re: Reliable soft starter
B"H
Thank you Goshen. Have a good one.
Similar Threads
-
Cutler Hammer Soft Starter
By iceman007 in forum ElectricalReplies: 11Last Post: 26-05-2010, 04:56 AM -
Cooy or Cosy - Soft Starter
By Lumpy2 in forum Technical SpeculationsReplies: 3Last Post: 05-04-2010, 11:57 AM -
electric starter panel for chiller
By Masdede in forum ElectricalReplies: 2Last Post: 26-06-2009, 10:45 AM -
where to get soft starter relays?
By paul_h in forum ElectricalReplies: 10Last Post: 24-03-2008, 02:33 PM -
SCR short in soft starter.
By mrsparky in forum ElectricalReplies: 0Last Post: 14-12-2007, 12:19 PM