Wiring a sauter actuator

[FaultCode]

Is it a 2 port or 3 port valve and do you have any other controls in line with it, i.e. open or close commands.

[Edit] Checking the drawings again I reckon you need scheme 5a but without the feedback loop, so---->

Controller - function - actuator

25 - 2-10v signal - 03
26 - 0 volts - MM
27 - 24 volts - 01

[Northy303]

Is it a 2 port or 3 port valve and do you have any other controls in line with it, i.e. open or close commands.

[Edit] Checking the drawings again I reckon you need scheme 5a but without the feedback loop, so---->

Controller - function - actuator

25 - 2-10v signal - 03
26 - 0 volts - MM
27 - 24 volts - 01

Many thanks mate
Going there tomorrow so will give it a try
It is just manually fully open at the moment
Will let you know how I get on.