Results 1 to 47 of 47
Thread: R600a
Threaded View
-
22-03-2007, 11:54 PM #14
Re: R600a
I have done this many times now, and all are still working. Tou should cut off some of the capillary 1st and change the drier.
I have spoken today with some colleagues about blockages with R600a and the only causes any of us can come up with are poor cleanliness during manufacture.
It can also handle a lot more moisture than other gases.
But sadly this is not the case. When people test systems in a controlled environment then it works OK, but when you jam the fridge in the back of a bar in a busy night club with a blocked condenser then it starts misbehaving.
ChillinIF AT FIRST YOU DON`T SUCCEED.
DESTROY ALL EVIDENCE THAT YOU TRIED!
and go get a cuppa