Results 1 to 3 of 3
Thread: Tap size
-
01-06-2017, 10:59 PM #1
Tap size
Hey guys
Got a punctured 3/8 inch (outside diameter) sensor well on the chilled water side of a steel pipe.My question is what size drill bit and tap size do i need in order to install a threaded plug ?
Thanks
-
01-06-2017, 11:31 PM #2
Re: Tap size
It depends on the size of the BSP plug you want.
Sizes here....
http://bit.ly/2qG6qXd
-
02-06-2017, 10:13 PM #3
Re: Tap size
Plug 1/4 inch (inside diameter) NPT