Results 1 to 9 of 9
Thread: Comressor GHH-RAND SKK321D
-
15-03-2017, 06:15 AM #1
Comressor GHH-RAND SKK321D
Hi All Colleagues..
Anyone can help with the drawings for the this compressor SKK321D 1995 y.
I have only a spare parts list. If are you know a limit of the shaft's axial play, it will be great..
Best Regards to All..
-
17-03-2017, 01:39 PM #2
Re: Comressor GHH-RAND SKK321D
The first time heard about this comp brand and model
-
21-03-2017, 07:42 AM #3
Re: Comressor GHH-RAND SKK321D
Hi avico.. I didn't know either until I met it. it old model 1995 y. manufactured.
-
21-03-2017, 08:07 AM #4
Re: Comressor GHH-RAND SKK321D
Scruw,
From what I see it's an air compressor, is that correct.
If it's refrigeration maybe post a picture, as it might be something else rebadged.
With 321 numbers in it, it sound big capacity like a Howden WRV321.
https://www.howden.com/Brochures/Pro...0WRV%20321.pdfLast edited by RANGER1; 21-03-2017 at 08:14 AM.
-
22-03-2017, 10:04 AM #5
Re: Comressor GHH-RAND SKK321D
Tnx RANGER.
it Gas compressor, manufactured be "Schraubenkompressoren Gmbh @ Co..
Unfortunately, im have not a photo now. May be a little later.
Regards.
-
22-03-2017, 10:58 AM #6
Re: Comressor GHH-RAND SKK321D
Hi, scruw
welcome to the RE forums ...
each compressor is a gas compressor ... but seems that GHH-RAND does not make refrigeration compressors, but for transportation or some other duty ... as far as I know ... but ... can you tell us which refrigerant is inside of unit.
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
28-03-2017, 08:57 AM #7
Re: Comressor GHH-RAND SKK321D
Hi Josip.
Tnx for your remark.
Yes indeed, every screw compressor is gas compressor. But I was keeping in mind to the gas butane, not ammonia or any *****. (Like gas in field gathering on oil production). This compressor be installed at the power station. RAND more dont manufactured these compressors and for this reason it is a rarity.
Best regards.
-
28-03-2017, 01:45 PM #8
Re: Comressor GHH-RAND SKK321D
I did inspections on 2 off SKK255G (1970) few times in Germany. We always used the Howden clearances for these compressors, they are running on nh3. Axial play: 255-0.125mm max and 321-0.35mm max.
-
29-03-2017, 01:33 PM #9
Re: Comressor GHH-RAND SKK321D
Hi Gerben.
Thank You for Your help..
Best Regards