Results 1 to 6 of 6
Thread: Frick RWB II Coalescing filter
-
14-03-2017, 01:37 AM #1
Frick RWB II Coalescing filter
How much oil will be needed when replacing Coalescing filter on a RWB II 60.
Thanks
-
14-03-2017, 08:10 AM #2
Re: Frick RWB II Coalescing filter
http://www.johnsoncontrols.com/-/med...ick_rwf_ii.pdf
Page 7 & 27 may be of use.
See torque setting on coalescer filter but on 27
-
14-03-2017, 09:02 PM #3
Re: Frick RWB II Coalescing filter
WYLBEK,
From what I can gather 25 gallons oil separator & 3.5 oil cooler.
-
16-03-2017, 04:49 AM #4
Re: Frick RWB II Coalescing filter
Thanks Ranger1, I looked up in manual that it holds 35 gallons in machine, but wasn't sure on how much would be in system elsewhere. 25gallons sounds good to me.
-
16-03-2017, 05:50 AM #5
Re: Frick RWB II Coalescing filter
Hey,
Don't forget - the Coalescor is on the weir (dry) side of the separator baffle..
Replacement of the Coalescor should not be impacted by oil in the separator.
Happy tinkering
-
16-03-2017, 07:48 AM #6