Results 1 to 6 of 6
Thread: Beko d70410
-
19-11-2016, 08:58 AM #1
Beko d70410
HELLO!
Does any of you have the manual for a BEKO ,product code DSE41020,MODEL D70410, refrigerator?
I want to find the resistance value of thermistors.
The problem is that the refrigerator does not cut off regularly.
-
19-11-2016, 08:59 AM #2
Re: Veko d70410
Sorry the refrigerator is BEKO.
-
19-11-2016, 09:45 AM #3
Re: Veko d70410
You think that the resistance value of thermistors will be on their manuals?
Try to contact the manufacturer.
-
19-11-2016, 03:11 PM #4
Re: Beko d70410
where can I find them????????
it is better by trial and error to change thermistors.
I also noticed the the interior fan fan is not working all the time.it is controlled by a pcb
-
19-11-2016, 03:55 PM #5
Re: Beko d70410
You can get the value from a new parts.
the fan is controlled by the evaporator temperature measured by a thermostat so it sounds ok.
Check the refrigerant charge.
-
27-11-2016, 05:20 PM #6
Re: Beko d70410
I am in a big trouble.I changed the air sensor with a new one but the fridge does not stop.
I measured -5 C at the fresh food compartment.
Does any of you have any information about the control circuit or the sensors.I also noticed that the indoor fan does not operate. That is why I suspect the control circuit.
control circuit:
PENTA elektronik
( K2 – V16 KV ĒK – Kardelen / 4360621685 )
air sensor :Nova elektronik
Tip-Model : 4216601585
evaporator sensor: Nova elektronik
Tip-Model : 4216601185