Results 1 to 7 of 7
-
07-09-2016, 09:27 AM #1
MYCOM compressor N6B and FM160L-M manual
Hello,I am new on this forum.
I just start to work in meat industry as a operator for cooling system,I had no previous experience.
They have old MYCOM compressor N6B and screw compressor FM160L-M.
I have not found manual for this compressor.
These two links :
http://www.mayekawausa.com/techdata/index.html
http://www.mycomcanada.com/downloads/ManualsDL.html
have instructions for newer compressor.
Where to find manual or manual for similar compressor.
Sorry for bad English.
Thanks
-
07-09-2016, 02:18 PM #2
Re: MYCOM compressor N6B and FM160L-M manual
Hi bato87,
I have manuals of those kind of compressors in pdf format, if you send me an email adress I can send you. When you say N6B I imagine you refer to N6WB, right?
-
08-09-2016, 09:04 AM #3
Re: MYCOM compressor N6B and FM160L-M manual
They have N6B,I don't now is N6B similar with N6WB,I think they are similar.I found manual for N6WB.
Can you send me manual for FM160L-M?My email is batop87@gmail.com.
Thanks
-
08-09-2016, 09:04 AM #4
Re: MYCOM compressor N6B and FM160L-M manual
They have N6B,I don't now is N6B similar with N6WB,I think they are similar.I found manual for N6WB.
Can you send me manual for FM160L-M?My email is batop87@gmail.com.
Thanks
-
09-09-2016, 04:08 AM #5
Re: MYCOM compressor N6B and FM160L-M manual
This should get you out of trouble!
http://www.hosbv.com/data/specificat...m%20160M-M.pdf
-
09-09-2016, 11:12 AM #6
Re: MYCOM compressor N6B and FM160L-M manual
Thank you!!!!!!!!!!!
-
09-09-2016, 10:04 PM #7
Re: MYCOM compressor N6B and FM160L-M manual
Bato87,
Main difference is valve springs & plate,
- WB use heavier springs which are not interchangeable, as won't clip into valve plate.
- water cooled heads on "B" have water jacket cast into head.
- Shaft seal is single type in "B" & double "WB", but interchangeable.
That"s about it.