Results 1 to 5 of 5
Thread: Wireless gauges
-
25-05-2016, 07:19 PM #1
Wireless gauges
I have a yellow jacket mantooth and I this will be a stupid question but high temp pipe clamp, where dose it go on the discharge of the compressor or the liquid line.
-
25-05-2016, 07:35 PM #2
Re: Wireless gauges
It all depends on what you want to measure.
- If its on the discharge you will get the discharge superheat.
- If it is on the liquid line you will get the sub cooling.
I believe the default for the YJ app is sub cooling, so if that is what you want to see then liquid line it is.
-
25-05-2016, 07:47 PM #3
Re: Wireless gauges
Ok thanks, I was looking at the testo smart probes as they are all wireless
-
25-05-2016, 09:12 PM #4
-
25-05-2016, 09:22 PM #5
Re: Wireless gauges
I find the interconnecting cable between the two pressure sensor too short and some times hard to fit