Results 1 to 9 of 9
Thread: changing r410 compressor to r22
-
01-08-2012, 09:30 PM #1
changing r410 compressor to r22
hi
i have 2 ton split unit operating with R410
its compressor is burned and i want to change it
i have anew compressor but its R22 type
is that possible to change the r410 compressor with r22 one
and is there any effect on the system
-
01-08-2012, 10:12 PM #2
Re: changing r410 compressor to r22
http://www.fire.nist.gov/bfrlpubs/bu...PDF/b02186.pdf
not recommended
-
01-08-2012, 10:14 PM #3
Re: changing r410 compressor to r22
u said its not recommende
why
-
01-08-2012, 10:18 PM #4
Re: changing r410 compressor to r22
different oils ,410 operates at twice the pressure- im trying to find some info to clarify this for you
-
01-08-2012, 10:28 PM #5
Re: changing r410 compressor to r22
-
01-08-2012, 10:57 PM #6
Re: changing r410 compressor to r22
thank u pal
-
17-01-2013, 10:05 PM #7
Re: changing r410 compressor to r22
please close the thread
-
18-01-2013, 01:30 AM #8
Re: changing r410 compressor to r22
Sorry to keep this open for one more post.
I am not disagreeing with anything, but Ehow advice is not to be taken seriously.
They are written by layman.
For example.
Because of this, every old air conditioner that used R-22 refrigerant must have the air compressor replaced when retrofitted or when the compressor fails.
-
18-01-2013, 06:44 AM #9
Re: changing r410 compressor to r22
thank u man
i appreciate that from u