Results 1 to 21 of 21
Thread: New VACUUM PUMP Needed... HELP
Threaded View
-
14-09-2010, 12:54 PM #1
New VACUUM PUMP Needed... HELP
Hi guys,
I'm looking to buy a new vacuum pump as the one I've got just now is approx 40 years old (3 generations old). I'm not really too sure what to look for. I take it the higher the CFM the better and obviously the higher HP of the motor is best but what about microns? Can anyone recommend a pump or at least what I should be looking for?
I've seen a few on eBay and some of them are from Hong Kong and much cheaper. They have Javec, VPUMP and the Hong Kong ones don't have a brand.
The pump I've got and always used was connected through my gauges to the 1/4 flare but most of the ones I've seen haven't got that connection so what do I connect them with?
Thanks for your help guys.
Similar Threads
-
Vacuum Pump Questions
By position1 in forum FundamentalsReplies: 7Last Post: 08-10-2009, 02:33 AM -
vacuum reduces when vac pump is isolated
By bill1983 in forum FundamentalsReplies: 40Last Post: 04-08-2009, 08:00 AM -
Troubleshooting a vacuum pump and gauge set.
By Old Codger in forum FundamentalsReplies: 7Last Post: 08-08-2008, 05:13 PM -
Vacuum Pump in a Hazardous Area?
By Cold Down Under in forum HydrocarbonsReplies: 3Last Post: 08-06-2008, 12:20 PM -
inverters pulling vacuum
By bangoman in forum Air ConditioningReplies: 2Last Post: 05-02-2008, 09:12 PM