Results 1 to 1 of 1
  1. #1
    Join Date
    Sep 2014
    Rep Power

    Red face How to increase the COP and SCP of adsorption chiller ?

    Dear all,

    I would to like to ask do anyone have any idea on how to increase the COP and SCP(Specific Cooling Power) of a silica gel adsorption chiller?
    COP= Heat removed by evaporator/ Heat supplied to system( normally is the hot water supplied to the adsorption bed)

    SCP= heat removed at evaporator/ mass of silica gel( 1 kg silica gel is being used in the experiment)*cycle time

    Currently we have two bed of silica gel adsorption bed, neither the faculty is willing to purchase extra adsorption bed( which able to reduce the cycle time) nor change a bigger size of adsorption bed ( which able to increase the mass of the silica gel to be put inside ).

    I am wondering what can i do else to improved the efficiency, perhaps to change the better heat exchanger or anything else? @.@

    Thank you everyone
    Last edited by QFGreg; 07-09-2014 at 11:05 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts