Results 1 to 2 of 2
Thread: Multiplex Piping
Threaded View
-
04-09-2008, 01:43 PM #1
Multiplex Piping
HI GUYS JUST CURIOUS
I HAVE A MEDIUM TEMP MULTIPLEX ON R22 USING SIX BLOWERS IN A DROP TEMP ROOM EVAPORATING @ O DEGREES C THE BLOWERS ARE SPACED SIX METERS APART AND THE LAST BLOWER IS 50 METERS AWAY FROM THE PLEX the system capacity is 150kw @0 evap what i want to know is do i run a suction and liquid header all the way to the last blower that can handle the full load or can i reducu accordingly as i get closer to the blowers
Similar Threads
-
Pressure piping test
By Volnei in forum IndustrialReplies: 7Last Post: 03-07-2010, 10:30 PM -
Q: Piping installation for Split Types
By brianubaldo in forum RefrigerantsReplies: 11Last Post: 30-04-2008, 02:23 PM -
Cooling tower piping design
By kaon in forum Technical SpeculationsReplies: 6Last Post: 24-01-2008, 07:00 AM -
Piping Advice
By Mickvee in forum Air ConditioningReplies: 10Last Post: 11-06-2006, 03:39 PM -
Vibration in refrigerant piping
By US Iceman in forum Technical DiscussionsReplies: 5Last Post: 01-05-2006, 11:53 PM