Results 1 to 2 of 2
Thread: Tin/Antimony Solder
-
10-03-2003, 12:15 PM #1
Tin/Antimony Solder
Does anyone have experience with 95% Sn and 5% Sb solder? The SnAg (6%Ag) is what I have always used for small refrig units. Iguess this is considered "Stay Brite". Comments please.
-
31-03-2003, 07:18 AM #2
Since I use a small propane torch, I try to use the highest silver content I can afford. Usually Dynaflow.
I visit http://www.fuel-saver.org
Similar Threads
-
solder fell into torch tip
By star882 in forum Chit Chat & Service StoriesReplies: 5Last Post: 01-01-2006, 11:53 PM -
SnAg solder (Stay-Brite): which fluxes are suitable?
By DaBit in forum Technical SpeculationsReplies: 3Last Post: 14-08-2005, 08:29 PM -
solder V Flare Driers
By Latte in forum Technical DiscussionsReplies: 45Last Post: 23-05-2004, 09:22 AM