Results 1 to 5 of 5
Thread: testing
-
09-10-2007, 05:38 PM #1
testing
hi guys
is there a sure way to diagnose a ptc start devise fault or compressor dont want to waste time ordering ptc start device only to find compressor faulty windings in compressor check out ok
thanks
-
09-10-2007, 05:45 PM #2
Re: testing
Change it out. I hate Ptc devises. Try a start assist with potential relay like the K-01. Some of the older ones over here are just useless and go out very often. Does it resemble something like this?
-
10-10-2007, 12:40 AM #3
Re: testing
Aaah, complete with natural cobwebs, just like ours
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
10-10-2007, 04:38 AM #4
-
10-10-2007, 04:38 AM #5
Re: testing
Notice the run cap attached to the dual run cap......
Similar Threads
-
Pressure testing for leaks on split a/c systems
By mrchatts in forum Air ConditioningReplies: 46Last Post: 08-04-2010, 10:02 AM -
Safe pressure testing with gauge manifold
By alexdouglas1969 in forum FundamentalsReplies: 27Last Post: 16-09-2007, 04:37 AM -
OFN Pressure testing hoses.
By Teknicool in forum Trouble ShootingReplies: 7Last Post: 08-07-2007, 11:41 AM -
Standards for Smoke testing of ducts ?
By sharshal in forum Air ConditioningReplies: 4Last Post: 04-07-2007, 06:45 PM -
noobie question re testing compressor
By aaron cadell in forum FundamentalsReplies: 19Last Post: 28-04-2003, 08:37 PM