Results 1 to 8 of 8
Thread: Unloaders
-
15-05-2006, 01:10 PM #1
Unloaders
Hi all
I'm new to this forum and i'm glad I found it
I just wanted to ask If enyone have expiriance with adjusting mechnical unloaders and what is the best way to do it...
Thanks
Cheers
Alonei
-
15-05-2006, 01:48 PM #2
Re: Unloaders
Hi Alonei,
There's many kind of unloader, particular in what compressor? (brand, model)
Guapo
-
15-05-2006, 02:26 PM #3
Re: Unloaders
Hi ALONEI,
Welcome to the forum.
What type of compressor are you asking about?
Or,
Are you asking how to adjust the controls for the unloaders?
Best Regards,
US Iceman
-
15-05-2006, 09:00 PM #4
Re: Unloaders
Welcome to RE forum Alonei
Originally Posted by ALONEI
Best regards,
Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
16-05-2006, 08:46 AM #5
Re: Unloaders
Hi all
Thank you for the answers I really appreciate it.
I cant remember the model because its not my "site" and I was just visiting .
I know its an old carrier comp'(ext' motor driven)
this comp' has a valve next to the oil pump and by closing or opening this valve you can unload or load the comp
My Q is : from your experience what is the best way to adjust unloader like this
Thank you
Cheers
ALONEILast edited by ALONEI; 16-05-2006 at 08:51 AM.
-
16-05-2006, 02:01 PM #6
Re: Unloaders
ALONEI,
Please see this thread for the links to your answers. The service manual for these compressors can be found through this link.
http://www.refrigeration-engineer.co...ead.php?t=4741
I hope this helps. It has been too long since I have worked on these to remember the exact details. I do remember that turning the adjustment changes the load/unload pressure for the cylinders.
-
17-05-2006, 08:58 AM #7
Re: Unloaders
Thanks iceman
-
17-05-2006, 09:09 PM #8
Re: Unloaders
Glad to help.
Similar Threads
-
Sabroe CMO28 mk2 comp unloaders
By GENGUS in forum Technical DiscussionsReplies: 2Last Post: 17-11-2006, 01:18 AM -
unloaders and oil press.
By aaron crimmins in forum FundamentalsReplies: 3Last Post: 22-08-2002, 12:52 AM