Results 1 to 9 of 9
Thread: AC Calc software
-
24-02-2006, 10:23 PM #1
AC Calc software
I was given a cd with the programme "Airwind" by a guy fron climate centre (when it was still NRS) which was great for AC heat load calculations. Unfortunately it was ok for a year then it timed out and now demands a product key which I dont have.
Does anyone know if there is any similar free software available on the internet anywhere?
-
24-02-2006, 10:27 PM #2
Re: AC Calc software
Originally Posted by Markie
-
24-02-2006, 11:12 PM #3
Re: AC Calc software
Airwind has gone upmarket I think....
http://www.mistralassociates.com/future.htmlBrian - Newton Abbot, Devon, UK
Retired March 2015
-
25-02-2006, 10:08 PM #4
Re: AC Calc software
Markie,
The ac calc software from Clik software is downloadable for a limited trial and I find it far easier to use than the Mistral program http://www.cliksoftware.com/pages/accalc.htm
I have used both, and whan I could not find anymore freebies, I had to bite the bullet and bought Click. I also find it very handy for sizing radiators when I'm designing central heating.Last edited by Karl Hofmann; 25-02-2006 at 10:13 PM.
Karl
-
25-02-2006, 11:44 PM #5
Re: AC Calc software
http://www.radcalcs.com/
Karl, try this for your rads.
cheers
eggs
-
26-02-2006, 07:31 AM #6
Re: AC Calc software
dear
here are some sites you are looking for
www.titus-hvac.com
http://coolit.co.za
www.hvaccomputer.com
www.fridgetech.com
regards
afeef
-
26-02-2006, 08:50 AM #7
Re: AC Calc software
PROGRAMS / SOFTWARE (link to site)
http://www.et.web.mek.dtu.dk/Coolpack/UK/index.html
http://www.kotza-international.com/b...ssources2.html
http://www.simutechmultimedia.com/
http://www.titus-hvac.com/software/
http://www.bfrl.nist.gov/info/software.html
http://au.refrignet.danfoss.com/SW/A...-B387D2F5701C}Last edited by fridg; 26-02-2006 at 08:53 AM.
The primary function of the design engineer is to make things difficult for the fabricator and impossible for the serviceman.
-
26-02-2006, 08:14 PM #8
Re: AC Calc software
not checked in for a couple of days, thanks for all posts. will wade through links now.
Thanks again guys.
-
07-05-2007, 12:00 AM #9
Re: AC Calc software
Hi Karl Hofmann
Reading this old thread ,did you compare the results from both and if so was one more accurate than the other? I use the mistral program but I have been playing around with AC Calc. I am finding that the glass database figures are higher than mistral and this is having a significant effect on the overall cooling load.What did you think.
Any comments would be appreciated.
Birds
Similar Threads
-
DX coil software
By abbasi in forum Tools and CalculatorsReplies: 6Last Post: 15-09-2009, 07:03 PM -
Free Software, Bèta vers.: Designbuilder
By Peter_1 in forum Tools and CalculatorsReplies: 2Last Post: 05-01-2006, 12:01 AM -
Sizing Calc but not as we know it
By Lippygit in forum Air ConditioningReplies: 3Last Post: 22-06-2005, 08:56 PM -
Training software
By Morph in forum TrainingReplies: 13Last Post: 30-03-2005, 11:43 PM -
Thank you to the software guys.
By setrite in forum Chit Chat & Service StoriesReplies: 1Last Post: 13-06-2002, 10:02 PM