Results 1 to 3 of 3
Thread: Scania Higer 2018
-
22-05-2024, 10:06 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- May 2020
- Location
- United Kingdom
- Posts
- 3
- Rep Power
- 0
Scania Higer 2018
Hello all
Can anyone point me in the right direction for fault code E41, (Compressor feedback, low pressure side)
plenty pressure there but no power going to the LP switch
-
23-05-2024, 06:53 PM #2
Veteran Poster
- Join Date
- Feb 2011
- Location
- scotland
- Posts
- 463
- Rep Power
- 17
Re: Scania Higer 2018
Could you apply the correct voltage to the LP switch to test the switch and controls work correctly?
Then trace back the wiring from the switch to find where your loosing voltage?
-
25-05-2024, 08:38 AM #3
Registered User
Hey, I am new to : RE
- Join Date
- May 2020
- Location
- United Kingdom
- Posts
- 3
- Rep Power
- 0
Re: Scania Higer 2018
Yes thats a good start, I had 2 coaches this week with the same fault was kind of hoping someone could put there finger on the pulse with the issue as its very time consuming especially without the wiring diagrams
Reply With Quote