Results 1 to 2 of 2

Threaded View

  1. 10-01-2021, 10:44 AM #2
    nike123's Avatar
    nike123
    nike123 is offline Moderator Site Moderator : and general nice guy
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: Panasonic H11 Error Code

    That sometimes depend on when you are making measurments, before or after error indication.
    Also it should be masured at DC voltage scale since AC is only carrier.

    At what multimeter position did you make your measurments?

    Disconect unit from power supply, and wait 10 min. Then connect your measuring instrument and recconect unit and check voltage at first 10-20 seconds.


    https://youtu.be/JPgoXH2h-9k
    Turn on captions!

    You can also make this simple communication tester!

    https://youtu.be/hlgbFkL6TOg
    Last edited by nike123; 10-01-2021 at 11:05 AM.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules