Results 1 to 6 of 6
Thread: Just for fun
-
13-01-2015, 05:13 PM #1
Just for fun
Any one want to hazard a guess as to what this is?
I placed an 8" shifter in the picture to give a size reference
Not really difficult I know but you don't often see them this size....
-
13-01-2015, 05:45 PM #2
Re: Just for fun
Hi David.
An interesting Photo you have there!
It looks like as you say a Large ?
Non Return Valve components maybe?
I have seen check valves of a similar design but never that big!
GrizzlyLast edited by Grizzly; 13-01-2015 at 06:09 PM.
-
13-01-2015, 07:54 PM #3
Re: Just for fun
Or a really huge solenoid valve?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
13-01-2015, 08:35 PM #4
Re: Just for fun
Hi David
Looks like the seat out of a stop / check valve, I would guess the valve is about 400 mm and the seat material looks like white metal.
PaulBorn to fish, forced to work
-
13-01-2015, 09:31 PM #5
Re: Just for fun
20150113_113512.jpg
Well done gentlemen it is indeed a suction check valve or as Frick call it a 12" multivalve assembly
It sits within this housing, the seat is actually just an "O" ring set into the sliding button
Had to replace because it was binding on the shaft & allowing the compressor to run backward on shutdown & screws don't like that!
-
14-01-2015, 07:57 AM #6
Re: Just for fun
Interesting a Fric in Scotland, you would have thought a Howden for sure!
Globalization I guess.