Results 1 to 10 of 10
-
01-08-2014, 07:34 AM #1
FRICK compressors RWB II -399Plus
Hi
Needing some help with finding a service manual for a Frick model RWB II -399Plus
Any help i would greatly appreciate.
Thank you.
email: Svetoslav_4040@yahoo.com
-
01-08-2014, 09:49 AM #2
Re: FRICK compressors RWB II -399Plus
Sir, you have experience with such a large compressors? need a lot of special tools, send to the factory in France or Denmark, for you security.
Josef
-
01-08-2014, 10:05 AM #3
Re: FRICK compressors RWB II -399Plus
We are on the planning stage of the project. We have two RWB II -399Plus, stored since 1991, but we don't have any technical information about them.
-
01-08-2014, 11:37 AM #4
Re: FRICK compressors RWB II -399Plus
http://www.johnsoncontrols.com/conte..._-_610_sed.pdf
There is a bit of information on the internet, depends what you want to know exactly.
That's a long time sitting idle, are they still pressurized with nitrogen or filled with oil for protection.
Would think shaft seal minimum would need replacement.Last edited by RANGER1; 01-08-2014 at 11:40 AM.
-
01-08-2014, 03:22 PM #5
Re: FRICK compressors RWB II -399Plus
Hi, hrrs
welcome to RE forums ....
hrrsRe: FRICK compressors RWB II -399Plus
We are on the planning stage of the project. We have two RWB II -399Plus, stored since 1991, but we don't have any technical information about them.
Please, visit this link below and search for yourself ....
http://www.johnsoncontrols.com/conte...mpressors.html
here you will find as follow:
- Rotary Screw Compressors (PDF)
- Installation, Operation, & Maintenance (PDF)
- Specifications, Engineering Data, Dimensions (PDF)
- SuperCoalescer™(PDF)
- Frick® SuperFilter™ II (PDF)
- Vibration Analysis (PDF)
- SuperCoalescer™ (PDF)
- Frick® 1-2-3 Proactive Protection Plan (PDF)
- Can be sized and selected in Coolware
- Make Your Compressor Last (PDF)
- Vyper Service Parts List 305/254 & 437/362 HP (PDF)
- Vyper Service Parts List 700/572 & 912/752 HP (PDF)
Of course, if you need some more info do not hesitate to contact us ... we'll try to help...
There is one forum .... for new members ...
http://www.refrigeration-engineer.co...p?72-New-to-RE
where you can introduce yourself .... what will be very nice , thanks ....
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
- Rotary Screw Compressors (PDF)
-
04-08-2014, 09:13 AM #6
Re: FRICK compressors RWB II -399Plus
Actually, we dont know, because they are packed.
I saw the pdf file, it would be great if it was for RWB II, but I think we can use some of the info
-
04-08-2014, 09:32 AM #7
Re: FRICK compressors RWB II -399Plus
http://www.genemco.com/catalog/frickcompressorPC01.pdf
This any good, it's on the net
-
04-08-2014, 09:12 PM #8
Re: FRICK compressors RWB II -399Plus
hrrs, suggest you contact Johnson controls & explain your circumstances, they may help out.
-
20-08-2014, 04:25 AM #9
Re: FRICK compressors RWB II -399Plus
Hi i sent a manual to email address supplied let me no if you dont get the manual
-
18-09-2014, 01:50 AM #10