Results 1 to 6 of 6
Thread: daiken parts for panansonic
-
19-02-2014, 07:56 PM #1
daiken parts for panansonic
Hi all,
I need an internal board for a Panasonic twin split. Cassette model CS-W24BB4P. Unfortunately it is obsolete. Does anyone know if there is a daiken board which would be suitable?
-
19-02-2014, 08:06 PM #2
Re: daiken parts for panansonic
daikin panasonic kit was only interchangable on the skyair (daikin) and the urban range(panasonic) as they were both manufactured by matsus.h,i,t,a (anti swear filter stops me typing it)
have u tried getting the pcb repaired?
-
19-02-2014, 08:48 PM #3
Re: daiken parts for panansonic
No I haven't, who do you suggest to repair it? Problem is fan won't run on slave unit, not getting a supply, swapped the boards and fan runs.
-
19-02-2014, 08:52 PM #4
Re: daiken parts for panansonic
http://www.techcentre.co.uk/repairs/...-circuit-board
before you do- check the relay for the fan is switching- could be pitted contacts- you can get pcb relays from RS components-for a few quid
-
19-02-2014, 09:07 PM #5
Re: daiken parts for panansonic
Cheers install, much appreciated. Is there anything else you can think of that I could be missing?
-
19-02-2014, 10:53 PM #6
Re: daiken parts for panansonic
there should be a power relay too that will switch the unit on- might be worth checking, also look for cracked soldered joints