Results 1 to 4 of 4
Thread: Vogt Ice machine
-
18-12-2013, 06:28 PM #1
Vogt Ice machine
Been asked to retro-fit a 5 tonne r22 Ice machine to suit a new drop in and move to a new site. I've been told that these things are a bit sensitive and that I might want to stay away from it?
I was hoping it would be a simple new drier, valve and drop in R22d?
Can anybody give me any advice?
-
19-12-2013, 09:38 AM #2
Re: Vogt Ice machine
NewmanRef,
I think you need to be prepared to spend a bit of time with it as yes they are a bit sensitive.
They need a slight flood back towards end of cycle for oil return.
Have you checked to see if you need to change Tx Valve, as it might save a bit of time if ,you don't.
Manuals on Vogt site.
-
19-12-2013, 05:01 PM #3
Re: Vogt Ice machine
ISCEON® MO29 is a good drop in.
Replace drier only, good vacuum and you might need to adjust TXV but do it close to end of cycle.
-
22-12-2013, 07:50 PM #4
Re: Vogt Ice machine
Thanks for your help gents. Both replies much appreciated. I am going to have a better look at this in the new year and may be in touch if I have any other questions. I have tried emailing Vogt technical for there recommendations as well but no replies so far.