Results 1 to 4 of 4
Thread: GRASSO RC11 Series
-
26-04-2013, 12:34 PM #1
GRASSO RC11 Series
Hi,
I am a university student and i need grasso RC11 series comprassors for my final project. We are going to redesing and prove the capacity of old cold store.there are lots of grasso comprassors in the machinary room. The guy said all of them RC 11 series comprassors.then I checked the gea's webside and i have comsel program for selection. But i couldnot find anything about RC11 series.
If you have any capacity diagram or selection software please share with me..
-
27-04-2013, 10:13 PM #2
Re: GRASSO RC11 Series
Hi, tnrzcn
Try links below ...
http://www.gearefrigeration.com/Prod...rc11__gbr_.pdf
http://www.gearefrigeration.com/Prod.../PADOR9119.pdf
http://www.marinerefrigeration.net/b...%20RC11%20.pdf
http://www.marinerefrigeration.net/b...%20RC11%20.pdf
http://www.gearefrigeration.com/en-u...e/Recips_e.htm
if you try Google ... Grasso RC11 ... you'll find more documents about this compressor ...
my advice ... forget Comsel and similar programs that you'll use later like experienced engineer ... now try to calculate compressor capacity manually ... you'll learn much more ....believe me
Hope this will help a little ...
Best regards, JosipLast edited by Josip; 27-04-2013 at 10:43 PM. Reason: add link
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
28-04-2013, 06:05 PM #3
Re: GRASSO RC11 Series
RC11-RC12.pdf
Hi, tnrzcn
I agree with Josip, try to calculate.
But to help you, know that RC12 (not 12E) is the continuity of the 11. So it's the same displacement and you can use comsel and select 12 serie.
attached you will find a calculation of RC611/RC612. the gap is probably due to a more accurate software with Comsel.
I cannot share you the old software.
Regards
-
03-05-2013, 10:34 PM #4
Re: GRASSO RC11 Series
Hi , Josip and Cricri
Thank you very much for your replies... You are right , i will try to calculate the capacities manually..
Thank again..
Regards..