Results 1 to 12 of 12
Thread: slotted channel
-
30-10-2012, 07:20 AM #1
slotted channel
anyone know where to get this type of slotted channel from?
DSC05021.jpgDSC05020.jpg
-
30-10-2012, 04:41 PM #2
Re: slotted channel
-
30-10-2012, 05:32 PM #3
-
30-10-2012, 07:10 PM #4
Re: slotted channel
rb you don't want much, currently ive searched tin unistrut,decrative unistrut, unistrut,hilti,sheffield insulations, aluminium unistrut,cabofil,chinese alternative construction materials, cant you just use aluminium strut and but a centrepunch??
-
30-10-2012, 07:25 PM #5
Re: slotted channel
http://www.hadleygroup.co.uk/ultrast...-standard.aspx
Google moves in a mysterious ways...
-
30-10-2012, 08:48 PM #6
Re: slotted channel
Last edited by r.bartlett; 30-10-2012 at 08:52 PM.
-
30-10-2012, 09:09 PM #7
-
30-10-2012, 09:12 PM #8
-
30-10-2012, 09:20 PM #9
Re: slotted channel
lol, just on a wind up mission ...
How is it better than standard stuff and how much cheaper is it? I pay about a tenner for 41x41 and about sevens for 41x21.
Cheers
Eggs
-
30-10-2012, 09:23 PM #10
Re: slotted channel
I used that stuff for a while and thought it was the business but it bends under any kind of weight if spanned over a metre or so. It's good for tray and stuff but that's about it. All our suppliers that used to stock it have stopped too..
-
30-10-2012, 10:46 PM #11
Re: slotted channel
Used to use loads of the smaller hilti channel, had markings on it for cm so easy to cut and measure, all the fittings had the nuts and bolts already on, used to use it for hanging cassettes etc.
Mostly found in Oxfordshire, UK :)
-
30-10-2012, 10:51 PM #12
Re: slotted channel
That stuff is crap , Buckles like Suarez under any sort of load!!!
Cheers
StuTool's ? check ! Condom's ? check !
If you can't fix it , f*ck it !!!