Results 1 to 4 of 4
-
26-07-2012, 01:32 AM #1
rookie poster
- Join Date
- Apr 2012
- Location
- UK
- Posts
- 14
- Rep Power
- 0
Copland scroll discharge temp thermistors
Keep finding Copland scrolls, running with the discharge thermistors either disconnected or hanging off pipes assuming because they are going out on overheat. Is there an issue with these ?
-
27-07-2012, 12:39 PM #2
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Apr 2009
- Location
- israel
- Age
- 50
- Posts
- 778
- Rep Power
- 19
Re: Copland scroll discharge temp thermistors
Hi
yep! it seems that they are not fit to working for long periodes at high temps, and after a while fail for no reason ,
so you find them bridged or disconnected,a while back we had the same issue with carrier reciprocating comps with a similar issue!!
good luckTHE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
-
29-07-2012, 02:29 AM #3
regular poster
- Join Date
- Mar 2010
- Location
- usa
- Age
- 46
- Posts
- 120
- Rep Power
- 17
Re: Copland scroll discharge temp thermistors
I havent had too many failures, but I have found lots of them that fell off. The clip seems to loose tension and they fall off. Metal tape works to hold them on the Discharge line.
-
29-07-2012, 07:05 PM #4
regular poster
- Join Date
- Dec 2010
- Location
- ireland
- Age
- 46
- Posts
- 62
- Rep Power
- 15
Re: Copland scroll discharge temp thermistors
never had one to fail... seen them cutting in and out when compressor injection cooling isnt working.. seen them linked out to get it going but if they checked it properly the would have relised injection cooling wasnt working
