Results 1 to 3 of 3
-
09-07-2012, 08:52 PM #1
Advice needed - need engineering / design work done.
I am not sure where I should be asking this question, so here it is.
I need to hire an engineer to design for me a refrigerated box. I need complete drawings and bill of materials. This box will be roughly 72" tall x 39" wide by 33" deep. It will be used to hold fresh flowers. Temperature needs to be close to 34F and no higher than 40F.
Where can I find an engineer or engineering firm that I can hire to do this job for me?
Thanks,
Darren
-
10-07-2012, 07:25 AM #2
Re: Advice needed - need engineering / design work done.
Fairly small box,wouldn't a small commercial fridge do the job,certainly would temperature wise.
One with a glass door ?“Life is like riding a bicycle. To keep your balance you must keep moving” Einstein
-
10-07-2012, 04:37 PM #3
Re: Advice needed - need engineering / design work done.
I am sure something like that would work as a starting point. However, I need a completely new design. This box will need to have 7 glass doors on the front and a few other special items. Therefore I really need someone who can do a new design for me. It certainly can be based off of an existing box though.
If you know anyone who can do this design for me I would greatly appreciate the referral.
Thanks,
Darren