Results 1 to 6 of 6
Thread: self install splits not cooling
-
03-08-2005, 05:57 PM #1
self install splits not cooling
Went to a site today to help finish an installation. The customer asked while I was on site to look at a couple of splits which they had installed themselves three years ago but they never seemed to cool.
the guy said he thinks he didn't connect the areoquip connector correctly and all the gas went out..
they had a company under contract which wanted to charge 800 quid to fix them.
can you see why they wern't cooling??
cheers
richard
-
03-08-2005, 07:13 PM #2
Re: self install splits not cooling
They forgot in the factory to drill the holes in the threated connection perhaps?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
03-08-2005, 07:54 PM #3
Re: self install splits not cooling
actually this is a protective block that come with the hoses
the guy didn't realise that they were suposed to come off before he connected them
cheers
richard
-
04-08-2005, 12:02 AM #4
Re: self install splits not cooling
here an old phrase says , give your bread to the baker to bake it even if he eats the half.
That's what they shoulded understand before installing the unitsEngineering, sciences, math, physics and my brain will generate "not responding " soon
-
04-08-2005, 08:32 PM #5
Re: self install splits not cooling
here an old phrase says , give your bread to the baker to bake it even if he eats the half.
Thats a new one on me Never heard it before.
-
04-08-2005, 09:36 PM #6
Re: self install splits not cooling
Your smiles indicates you liked it Frank . . . keep it in mind , it's old but useful
Engineering, sciences, math, physics and my brain will generate "not responding " soon
Similar Threads
-
Heating / Cooling Control
By walden in forum ElectricalReplies: 11Last Post: 16-04-2006, 01:20 PM -
cooling tower without fillings
By Lc_shi in forum FundamentalsReplies: 3Last Post: 27-12-2005, 12:55 AM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum IndustrialReplies: 5Last Post: 14-10-2005, 06:34 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum FundamentalsReplies: 0Last Post: 13-10-2005, 05:14 AM -
Regulation of cooling capacity
By npaisnel in forum DomesticReplies: 13Last Post: 08-02-2002, 11:22 PM