Results 1 to 2 of 2
Thread: Mitsu Heavy Industry
-
14-07-2005, 06:39 PM #1
Mitsu Heavy Industry
Worked today on a number of ceiling cassettes from Mitsu Heavy industries
2 x Model no FDTA 251 indoors
Everything seems to be working ok but noticed that the wall controller display goes from the setpoint temp, set fan speed, louver position etc to show the display of 0.0hz then it goes back to the normal setting display.
The controller display changes about every 10secounds.
Is this normal for this range of Mitsu units
Bobjob
-
14-07-2005, 11:00 PM #2
Re: Mitsu Heavy Industry
Interesting ....................
Brian - Newton Abbot, Devon, UK
Retired March 2015
Similar Threads
-
Mitsi HEAVY
By Latte in forum Air ConditioningReplies: 4Last Post: 27-01-2006, 02:21 PM -
Mitsu Heavy Ind. Fault Codes...
By Scooby in forum Air ConditioningReplies: 1Last Post: 08-12-2005, 08:37 PM -
Mitsubishi Heavy Industry
By Abe in forum Air ConditioningReplies: 7Last Post: 09-03-2005, 08:37 AM -
Mitsu
By Abe in forum Air ConditioningReplies: 11Last Post: 05-01-2003, 02:19 PM