Results 1 to 22 of 22
Thread: H.P switch testing
Threaded View
-
22-05-2005, 10:21 PM #4
Re: H.P switch testing
Hi Bernard
Most of the posts refer to testing the HP prior to fitting but you do need to soak test the HP every year during maintenance inspections. To do this we bypass the stat and let the compressor run until the HP trips. Adjustments are sometimes made to set the correct cut out dependant on the gas used.
Similar Threads
-
Pressure testing for leaks on split a/c systems
By mrchatts in forum Air ConditioningReplies: 46Last Post: 08-04-2010, 10:02 AM -
flow switch connection
By afeef in forum The Trail of TearsReplies: 18Last Post: 23-12-2009, 06:55 PM -
RCV and HIGH PRESSURE SWITCH
By abbasi in forum FundamentalsReplies: 3Last Post: 22-03-2006, 08:51 AM -
shower switch fault !
By Krups in forum ElectricalReplies: 10Last Post: 19-10-2005, 09:10 PM -
Oil Pressure Switch
By Abe in forum CommercialReplies: 9Last Post: 15-03-2003, 11:18 AM