Results 1 to 3 of 3
Threaded View
-
29-09-2010, 09:17 PM #3
Re: Carbo cooler product temperature control
We have controlled product tempreture best with water pre-cooler for varying seasonal water temps .
Used plate heat exchanger for this .
You could use auto back pressure/tempreture regulator but you would not go much below -3 C or risk icing of plate .
Hope this helps .
Similar Threads
-
majonnia carbo cooler not at temp
By Waynexb in forum Trouble ShootingReplies: 1Last Post: 15-08-2010, 10:13 AM -
cooler control
By jayjay in forum CommercialReplies: 10Last Post: 16-09-2008, 02:21 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM -
Searle cellar cooler control problem
By iceman007 in forum ElectricalReplies: 6Last Post: 06-07-2004, 08:57 PM -
Article in ACH&R News
By Gary in forum FundamentalsReplies: 8Last Post: 20-05-2003, 12:27 AM