Results 1 to 7 of 7
Thread: beermaster
-
10-08-2010, 07:42 PM #1
beermaster
have a beermaster showing h1 on the display i assume this is a fault code but have no manual have called climate center but was no help
-
10-08-2010, 08:18 PM #2
Re: beermaster
I think you will find that alarms actually HI (HIGH TEMP) as opposed to H1.
Switch the thing off and start from scratch. does the controller start ok, Condensing unit etc. These things as as simple as they get, apart from p1 (probe fault) the controller wont give any clues whats up
-
10-08-2010, 08:49 PM #3
Re: beermaster
i agree with latte
start from scratch what temp was the system on arrival to call?
was condensing unit running? etc
-
10-08-2010, 08:50 PM #4
Re: beermaster
the unit starts ok but seems to be over cooling
-
10-08-2010, 10:09 PM #5
Re: beermaster
define overcooling. whats it set at and whats it pulling down to. Is the display reading the correct temp ?
-
19-08-2010, 10:34 PM #6
Re: beermaster
if your still having problems replace sensor.it seems to be the main problem with these
-
20-08-2010, 06:43 PM #7
Re: beermaster
was geting info over the phone about the unit went to site and checked unit found the air sensor was missing
Similar Threads
-
beermaster r134a fault
By garytreez in forum Technical DiscussionsReplies: 10Last Post: 04-08-2010, 07:44 PM -
NRS BeerMaster cellar cooler
By madfriday in forum CommercialReplies: 13Last Post: 22-06-2009, 09:24 PM -
Leaking Beermaster
By Andy AC in forum CommercialReplies: 11Last Post: 15-08-2008, 10:09 PM