Results 1 to 5 of 5
Thread: l,unite hermetique compressor
Threaded View
-
10-08-2010, 08:31 PM #5
Re: l,unite hermetique compressor
Is it also possible for you to fit a single phase compressor instead?
Wholesaler should be able to size up the correct one but you'll need a neutral and may need to uprate one of the original 3 phase fuses (yeah, I found that out the hard way...)
Cheers,
Andy.Health and safety first..........unless I'm in a hurry.
Similar Threads
-
Suction gas <-> liquid line heat exchange and performance gains
By DaBit in forum Technical SpeculationsReplies: 30Last Post: 18-05-2010, 01:52 PM -
Catastrophic compressor failure...need info
By bsh3239 in forum Industrial CompressorsReplies: 40Last Post: 28-11-2009, 04:30 PM -
Amana SRD25S5W: compressor with intermittent cooling while running under full voltage
By im_dragon in forum DomesticReplies: 3Last Post: 29-10-2009, 09:41 PM -
seized inv compressor
By flash in forum Air ConditioningReplies: 2Last Post: 09-04-2008, 06:56 PM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM