Results 1 to 9 of 9
Thread: help needed
-
12-08-2004, 06:29 AM #1
help needed
Hope someone could help,looking for any manual and electric diagrams for a Carrier water chiller model 30GF 155A 1918 BEE manufactured in 1989
Many thanks in advance
Leo
-
12-08-2004, 07:12 AM #2
Re: help needed
leo
you and me both...
http://groups.google.co.uk/groups?q=...gin.net&rnum=2
http://groups.google.co.uk/groups?hl...net%26rnum%3D1
however it's just sprung to mind that a guy i took on -ken- as pretty much the last thing i did at my old company had just left carrier
i'll give him a ring and ask him if he has info
cheers
richard
-
12-08-2004, 08:15 AM #3
Re: help needed
Will Carrier Tech. support not supply them??
-
12-08-2004, 03:39 PM #4
Re: help needed
Thanks very much,i appreciate your help Richard.
I've been looking at two of such units,one of them has a faulty compressor while the other sometimes gives a fault code (53)and comp.no three stops.While it runs i cannot find anything wrong with it,amps are exactly the same as the other comps.I measured the insulation with a megger and it looks just fine.I noticed a "bulb" and i think it measures the discharge temperature.....could that be the fault?these chillers are managed by a control which i think is called flotronic.Unfortunally i haven't got any literature whatsoever regarding the control or the chiller.
Any help would be appreciated!
Thanks
Leo
-
12-08-2004, 04:10 PM #5
Re: help needed
I have a manual of the Prodialog of Carrier.
Is it this what you'r looking for?It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
12-08-2004, 05:35 PM #6
Re: help needed
Hi Leo.
Carrier give out all the information you need on their website.
You must know the manufacturing factoty.
In your case, I belive it was made in France.
www.carrier.com
Ciao
Chemi
-
12-08-2004, 05:50 PM #7
Re: help needed
Thanks for your help.........Freezer,on their web site they only give literature for the latest models.....Peter,thanks can you send it to my e-mail?
Shalom to you Chemi,nice guess it's made in France.......would that help if i search in the Carrier site?
Thanks everyone!
Leo
-
12-08-2004, 06:06 PM #8
Re: help needed
I found it!!!Thanks everyone!Thanks Chemi,i just selected the country and everything appeared!Installation manuals in french,electric diagrams in english!My "mishegass"didn't let me see it!!!
Thanks again everyone.......i have work to do now
Leo
-
12-08-2004, 06:07 PM #9
Re: help needed
Yes.
You should look for the country on their web site and then you will search your model no.
If you have any problems. let me know and I will help.
By the way, it wasn't a guess, the factory in France covers Europe and Middle East customers but also the Japanese factory does.
Chemi
Similar Threads
-
Help needed in Venezuela.
By El Tel in forum IndustrialReplies: 9Last Post: 15-03-2010, 10:54 PM -
Autocascade refrigeration system: design verification needed
By DaBit in forum Technical SpeculationsReplies: 3Last Post: 07-02-2010, 07:48 AM -
Help needed, please.
By nomiracle in forum TrainingReplies: 1Last Post: 16-11-2005, 06:26 PM -
How many small strands needed to equal pipe pressure drop?
By DaBit in forum FundamentalsReplies: 17Last Post: 25-08-2003, 09:56 PM -
Roof box needed
By Simon in forum Chit Chat & Service StoriesReplies: 1Last Post: 14-03-2002, 10:15 PM