Results 1 to 11 of 11
-
04-07-2009, 01:50 PM #1
Toshiba Air Conditioning fault codes,
Does anybody know what these codes are ?
01 06 and 1E are the ones that have been showing at a site I have been working at.
-
04-07-2009, 03:22 PM #2
Re: Toshiba Air Conditioning fault codes,
Hi suctionheader .
Download from the link I have provided and the codes are explained.
Good Luck Grizzly
http://www.mediafire.com/?sharekey=0...b07cc7f7a4c543
Not all the codes you state are there though.
What is the actual unit you have a problem with?
-
04-07-2009, 03:33 PM #3
Re: Toshiba Air Conditioning fault codes,
Follow this link
http://www.realtime-controls.co.uk/p...iss2.00.00.pdf
The first part of the code is the unit number, the second (06) relates to how many times the electronics have tried before finally giving up and the last part is the actual error - in this case, High Dischage pressureLast edited by frank; 04-07-2009 at 03:36 PM.
-
14-07-2009, 10:02 AM #4
Re: Toshiba Air Conditioning fault codes,
Hi Suctionheader,
Sorry Frank you are wrong. There is no count for electronics trying to start then giving up. (but some models have a compressor start count)
I think the codes should read
01.0b
01.1E
The 01 is the master unit
06 is actually 0b and is a float switch trip - check drains \ pump operation.
1E is the compressor discharge temerature exceeded 130C - check air flows (in & out), gas charge & Td sensor.
Hope this helps
Loops
-
14-07-2009, 07:50 PM #5
Re: Toshiba Air Conditioning fault codes,
http://www.refrigeration-engineer.co...ad.php?t=16639
Regards
LatteLast edited by Latte; 14-07-2009 at 07:54 PM.
-
14-07-2009, 08:29 PM #6
Re: Toshiba Air Conditioning fault codes,
.
............ Listen to what Loops says, he knows the kit inside out.
.
-
25-08-2009, 09:04 PM #7
Re: Toshiba Air Conditioning fault codes,
does it matter what order you wire the p q wiring in a multi modular 407c?
-
28-08-2009, 09:25 AM #8
Re: Toshiba Air Conditioning fault codes,
Paddyaircon,
I'd sugest you should have started a new thread for this enquirey but seeing as you've asked a question........
The PQ network on the old R407c 2-pipe modular multi is a non-polarised network. Just wire from one end to the other (not ring main style).
You'll need a 1.5mm2 2-core screened cable minimum.
Cheers
Loops
-
29-09-2009, 03:21 PM #9
Re: Toshiba Air Conditioning fault codes,
Just had a call from one of our engineers and hes got P10 code up on the controller.
Its a RAV unit,
I told him to ring Toshiba Technical, as P10 isnt listed :lol:
-
29-09-2009, 03:30 PM #10
Re: Toshiba Air Conditioning fault codes,
P10 is "Float switch open circuit (high water level)"
Cheers
Eggs
-
01-11-2009, 04:27 PM #11
Re: Toshiba Air Conditioning fault codes,
Thanks Egg,
I have just come back from another call with that fault and after going through all my Tosh books i couldnt find anything either. Had booked it to go back after speaking to Toshiba but thats saved me a phone call
Regards
Latte
Similar Threads
-
Toshiba Fault codes
By bernard in forum Air ConditioningReplies: 28Last Post: 03-08-2010, 11:09 AM -
Toshiba cassette fault codes
By glenn1340 in forum Air ConditioningReplies: 9Last Post: 05-01-2009, 08:38 PM -
toshiba a/c fault codes
By fsfd1 in forum Trouble ShootingReplies: 1Last Post: 30-09-2008, 07:10 PM -
toshiba fault codes
By COOL BOB in forum New to REReplies: 7Last Post: 09-12-2007, 08:18 AM -
Toshiba a/c fault codes
By Latte in forum Air ConditioningReplies: 3Last Post: 27-09-2007, 09:33 PM