Results 1 to 6 of 6
-
29-01-2009, 10:59 AM #1
I need a tool which may not exist please help!
The tool in question needs to have a flexible shaft (approx 160mm in length)
screwdriver type handle and changeable heads preferably
the head socket has to have an outside diameter of 12mm or less
needs to have 8mm ''nut spinner'' head
and to make this even more bizarre...
a 2.5mm hex/allen key head ideally
(a compromise to the hex would be the equivalent torx)
it is for a range of equipment with hard to access points
ideally all in one tool
but can be 2 separate tools
please help
any suggestions or advice would be greatly appreciated
-
29-01-2009, 11:41 AM #2
Re: I need a tool which may not exist please help!
try seeing you local snap on tool dealer there new screwdriver set has interchangeable shafts
Paul
"KEEP IT COOL"
-
29-01-2009, 11:48 AM #3
Re: I need a tool which may not exist please help!
thanks i'll give it a shot
-
29-01-2009, 05:08 PM #4
Re: I need a tool which may not exist please help!
i think the panic is over after spending ages on the net etc
-
29-01-2009, 05:35 PM #5
-
30-01-2009, 04:08 PM #6
Re: I need a tool which may not exist please help!
surprise surprise i had to get 2 tools to do the job but both spot-on
the flexible shaft screwdriver set (3 of) is amazing although they are so long they look a bit comical
got assorted bits for them they work a treat
also got sorted with some folding hex and torx key sets and some supermini spanners all from CPC even better next day delivery
i'm a happy chappy
bring on the weekend!
Similar Threads
-
Mitsubishi M-Net maintenance tool for sale?
By sigorst in forum Air ConditioningReplies: 6Last Post: 14-12-2009, 08:40 PM -
Daikin VRV diagnostic tool
By icecube51 in forum Tools and CalculatorsReplies: 11Last Post: 25-11-2008, 06:27 PM -
Mitsubishi M-Net Maintenance tool
By sigorst in forum Air ConditioningReplies: 3Last Post: 07-03-2006, 05:27 PM -
simulation tool
By Lc_shi in forum FundamentalsReplies: 7Last Post: 23-02-2006, 02:46 AM -
want good price r410 flaring tool in aust ?
By peter1927 in forum Tools and CalculatorsReplies: 2Last Post: 24-11-2005, 05:48 AM