Results 1 to 2 of 2
Thread: R134a System Design
-
23-07-2008, 09:42 PM #1
R134a System Design
Hello everyone,
I was asked to educated myself on R134a refrigeration system design. I know the theory behind the whole system but what I lack is how to start from a given volume of space (i.e. 25 cu.ft) and then start selecting my evaporator (coil size, width X height X depth, tube I.D. , wall thickness, Fin thickness spacing, etc.) and then condenser, and compressor and cap tube length, thickness (pressure drops?)
I am sorry if this is a repeat thread, I had to start from somewhere.
Thank you all, and looking forward to learning more...
adrian
-
23-07-2008, 10:51 PM #2
Re: R134a System Design
Very symple, read this post.
http://www.refrigeration-engineer.co...ad.php?t=14013
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
Single stage refrigeration system optimizing diagram
By autt in forum System OptimizationReplies: 34Last Post: 03-12-2008, 03:13 PM -
Fan model for system optimization
By autt in forum System OptimizationReplies: 8Last Post: 31-03-2007, 05:34 AM -
What is System balance?
By shogun7 in forum Technical SpeculationsReplies: 56Last Post: 19-01-2006, 09:47 AM