Results 1 to 18 of 18
Thread: training
-
04-07-2008, 10:47 PM #1
training
hello peeps, im looking to get into the refrigeration industry (build/install cold/freezer/chiller rooms etc) & maintenance/repairs, later to add air con, was wondering what qualifications do i need?
Can someone recommend a training center where i can do this in a few weeks rather than a year/s in college?
All advice will be much appreciated no matter how small.
cheers
-
04-07-2008, 11:05 PM #2
Re: training
Hello Charlie.
Not wanting to be rude but its a tall order to learn all that you want in a few weeks.
What background do you come from?
It might help if we know.
Are you electrical, Plumbing, construction or something else that might give you a start?
Cheers taz.
Ps if you find somwhere that teaches you what you want in a few weeks let us all know because it will be a fanstatic training centre.
-
05-07-2008, 05:36 PM #3
Re: training
A few weeks. Don't mean to be harsh but it ain't going to happen in a few weeks.
The difference between genius and stupidity is that genius has its limits.
Marc
-
05-07-2008, 06:09 PM #4
Re: training
Hi lads, but it will happen,it depends on the person, for me it happend, learning all refrigeration just in couple of weeks! I passed two years in college and was for me just couple of days even! cos time going too fast!
Dear Charllie,be patient, nothing will happen over a night!
Goodluck in your plans, Ali
-
05-07-2008, 07:22 PM #5
Re: training
hi sorry if i come across as a bit naive, which was not my intention, i know life is a learning curve.
i think i did not explain myself properly. Im 29 with a young family, and thats why i said a few weeks meaning i cannot be at college full-time.
I need to know what are the basic (if there is such a thing) qualifications i need to get me started in the field.
I come from an electrical background, and im very 'hands on' person.
thanks in advance
-
05-07-2008, 08:40 PM #6
-
05-07-2008, 08:50 PM #7
Re: training
If you are electrical then you will have a start on most.
You only need a refrigerant handling certificate to be legal. The industry tend to opt for a level 2 NVQ as a minimum standard, which is a two year course for most. If you want to go it alone then the truth is no one can stop you.
You can do night school or distance learning to get your quals but for the NVQ you must be work based for the evidence so it is a catch 22.
all the best taz.
-
11-08-2008, 09:43 PM #8
Re: training
hi there i went to H.A.L trianing centre/services in Doncaster got myself my NVQ level 2 in 2 weeks!! obviously its no match for real life experience but its a start!! and now im a trainee refrigeration engineer so things are looking up!!
-
19-08-2008, 12:20 PM #9
Re: training
i went to H.A.L trianing centre/services in Doncaster got myself my NVQ level 2 in 2 weeks!
If you think you have an NVQ in Refrigeration and Air Conditioning from HAL then either you have misunderstood or you have been misinformed!!!!!!!!!!!!!Tony
-
19-08-2008, 11:00 PM #10
Re: training
Quite correct Tony, HAL do not provide NVQ certification.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
20-08-2008, 12:30 AM #11
-
14-10-2008, 03:33 AM #12
Re: training
it takes a total of 8 months over a 4 year span in Canada
-
14-10-2008, 08:29 PM #13
Re: training
Hello peeps
Thanks once again for the replys.
Have been looking around at some training centers and have paid a vist to h.a.l in doncaster and prtc in burnley. Both offering similar course content but varying in price. Has anyone been to either one of these and how did they find them, also any other traning centers any one would recommend.
cheers
-
14-10-2008, 10:47 PM #14
Re: training
I advice u to do the on line course called (NATE CORE) with carrier corporation because its necessary for all whom working in the HVAC field.
-
16-10-2008, 06:53 AM #15
Re: training
Don,t listen to these guys charlie if you want to install coolers, freezers ,then go ahead ,you don,t really even need to go to school,all you need is a good pipe wrench and a good hammer.Oh it helps to have some good duct tape ,so off ya go ,have fun
-
16-10-2008, 09:51 PM #16
Re: training
Yo Paulie, go back under that rock where you came from and duck tape yourself to it so you stay there,O yeah give yourself a good knock whit that hammer you use to repair things and have a good long sleep. in the mean time we will explain to the younsters how they can get in this bussines legaly and secure.
Ice
if you step on some tows keep in mind to get a kick in the **S
-
16-10-2008, 10:01 PM #17
Re: training
Now Charlie,
if you have a good basic electric knowledge you can start to learn the basic operating cycles of a cooling device, then try to learn the necessarily parts that comes in between,than the different models of parts that basically works the same as any other model,and so one and one. go to night school, even if it takes 3 years or so. try to find a job in the field,even when it is for cleaning up after a technician. ask honest questions to tech guys,don't start for the money,but for the love of the job.
you see, it will comes like nice sweet honey and never stop loving it.
just mi point of view.
Ice
-
16-10-2008, 11:54 PM #18
Re: training
Message for Tony, i believe your avatar is of Sabroes With Unisab controllers, brings back many a fond memory. I don't have the pleasure now, but i used to look after about twenty of them, nursed and rebuilt them through there life, really good machines.
CB
Similar Threads
-
Refrigeration training
By Alistair in forum TrainingReplies: 22Last Post: 11-02-2011, 01:54 AM -
R410a recommended training??
By matt p in forum RefrigerantsReplies: 9Last Post: 25-01-2010, 03:55 AM -
Lack Of Training Centres
By Latte in forum TrainingReplies: 12Last Post: 06-11-2008, 02:56 PM -
Whats expected from training?
By taz24 in forum TrainingReplies: 13Last Post: 28-11-2006, 08:50 PM -
Training Problem.
By dogma in forum TrainingReplies: 17Last Post: 03-09-2006, 11:24 AM