Results 1 to 5 of 5
Thread: Big Display Case
Threaded View
-
01-07-2003, 10:49 PM #1
Big Display Case
I get a call from a filling station, wants me to install a display unit inside the shop. I go to site and this is what confronts me.
There is this huge display unit measuring 12 feet long, over 4 feet deep and around 85 inches high. It is parked on the forecourt with a tarpaulin draped over it.
Now the gaffer says he tried but couldnt get it into the shop. I says Im not surprised, even if you knocked out the windows you wouldnt get the bleeder in.
You have got to knock the wall down and rebuild it.
The owner bought it for £8000.00 second hand and the sellar smartly dropped it off and sped away like hell.
Now I am not one from running away from a " challenge" or an "impending headache"
So my question is:
Does this thing break apart so I , or if I can rephrase, " if we" can take this beast inside the shop and connect up with the remote unit.
It is a " FROST-TROL" Make, no ID plates, etc
Condensing Unit is a Hubbard HEPS Scroller
I am looking for anyone who has experience of these units willing to knock it apart and rebuild inside.
Site is near Newarke, near Nottingham
Thx
Similar Threads
-
display case evaparator fans
By Mark in forum Supermarket RefrigerationReplies: 68Last Post: 16-01-2011, 03:03 AM -
Tinkering with an old Ref glass display case
By fix_it_man74 in forum Trouble ShootingReplies: 3Last Post: 07-08-2006, 02:35 PM -
Need help with a dual compressor display case
By kengineering in forum Technical DiscussionsReplies: 15Last Post: 15-03-2006, 07:32 PM -
display case temp alarms
By shark26 in forum Supermarket RefrigerationReplies: 9Last Post: 17-01-2006, 10:07 AM -
Fogal Open Display Case
By Abe in forum CommercialReplies: 2Last Post: 07-05-2005, 08:47 PM