Results 1 to 2 of 2
Thread: Searle Evaporator
Threaded View
-
06-12-2002, 11:20 PM #1
Searle Evaporator
Has anyone had this problem
Searle evaporator, three fans, each three phase. All three motors sit on a shelf which is supported by three upright brackets. One bracket has a crack on the base plate mounting.
Swith them on and you can hear the vibration outside the room.
Do I :
1: Remove the upright bracket and try braze it with silver solder
2: Obtain a new bracket from Searle
Reason I ask, If I braze the crack will it work, or will I be serving my interests and the customers better by getting a new bracket
And will Searle supply me with this part
Similar Threads
-
Designing Roll Bond Evaporator
By Munzar Ata in forum FundamentalsReplies: 11Last Post: 05-08-2010, 11:31 AM -
Air Source Heat Pump - temp of refrigerant leaving evaporator
By anup in forum FundamentalsReplies: 3Last Post: 06-11-2006, 05:04 AM -
Searle Evaporator Heaters
By Abe in forum CommercialReplies: 14Last Post: 31-12-2005, 10:24 AM -
Change evaporator
By tralex in forum FundamentalsReplies: 6Last Post: 29-12-2005, 07:53 PM -
Searle cellar cooler control problem
By iceman007 in forum ElectricalReplies: 6Last Post: 06-07-2004, 08:57 PM