Results 1 to 7 of 7
Thread: Fan flow
Threaded View
-
16-02-2006, 11:41 AM #1
Fan flow
Hi guys.
I was running a few tests today and was just wondering what your speculations would be
Constants. Fan motor, pwr supply, air baffle, refrigerated space, ambient, test equiptment.
I start with a 20inch fan and matching cowl and measure Watts, Amps, M3/Hr and Rpm.
What will happen to these values if I increse firstly the blade and cowl diameter by 1 inch?
Then increase the pitch.
And decrease the pitch.
I have results but would like your speculation.
Similar Threads
-
flow switch connection
By afeef in forum The Trail of TearsReplies: 18Last Post: 23-12-2009, 06:55 PM -
capillary tubes and mass flow when fed with liquid/gas
By DaBit in forum FundamentalsReplies: 15Last Post: 24-10-2002, 06:52 PM -
Not enough air flow
By coolsights2000 in forum Technical DiscussionsReplies: 1Last Post: 22-07-2002, 06:35 PM -
Accidental Release Flow Rates
By mbeychok in forum IndustrialReplies: 0Last Post: 20-11-2001, 12:53 AM -
Accidental Release Flow Rates
By mbeychok in forum Tools and CalculatorsReplies: 0Last Post: 20-11-2001, 12:45 AM