I have a 9 kw liquid/water heat pump. Refrigerant is R410A. Because of a broken pipe i changed the condensor plate heat exhanger. After the change, the expansion valve has started to make pulse vibration/noise 5-10 minutes after startup. When the vibration occurs, i can se some bubbles in the sight glas.

The water pump for the evaporater have 3 speeds. There is less vibration at the lowest speed, and if i run the pump on full speed, the vibration is constant, not only pulses.

I tried to increase the superheat, but it did not solve the problem.
What can the reason for this be? Can it be to much refrigerant?