Results 1 to 10 of 10
Thread: R134a cooler
Threaded View
-
03-10-2010, 06:14 AM #1
R134a cooler
I got a true brand cooler. I put a new cap tube and filter drier. It's seems to be running ok but the low side seems to low.
The cooler holds a 10 oz charge r134a
I'm getting about 28 psi resting
When running the low side is 13 psi or 11 degrees F
High side 130 psi or about 100 degrees F
The evaporator was 20 degrees F
Cooler is holding good at 40 degrees F.
Cap tube is 12 ft of .064 in
Is the system still restricted? Is it ok to run it?
Similar Threads
-
How to change (retrofit) a quite a meat cooler with R12 to r134a system.
By Ray Vella in forum FundamentalsReplies: 15Last Post: 26-08-2010, 01:47 PM -
Freeze Spray -- Venting R134a Illegal?
By Z2TT in forum Chit Chat & Service StoriesReplies: 10Last Post: 29-07-2010, 09:29 PM -
Fabrication of Cooler Tube & Shell Cooler
By rickyccong in forum Technical DiscussionsReplies: 1Last Post: 27-07-2009, 02:25 PM -
Air cooler broken
By Rio69 in forum Trouble ShootingReplies: 5Last Post: 26-06-2009, 02:47 PM