Results 1 to 7 of 7
Thread: Remote fitted condensing unit
Threaded View
-
14-04-2010, 06:14 AM #1
Remote fitted condensing unit
Hi Everyone.
If the condensing unit of a refrigeration system is remote fitted, how is it accounted in component selection?. For example a walk-in cold room with heat load of, say 4000 BTUH, has to be constructed either with the condensing unit attached to it or the unit 10 m (32.8 ft) away. If the condensing unit is away will it use the same condensing unit as that of the first case? Or how is it selected.
Thanks in advance
With regards
Rayin
Similar Threads
-
DX capacity lower than condensing unit
By M.Saleh in forum Air ConditioningReplies: 2Last Post: 18-01-2010, 03:01 AM -
Sizing a condensing unit for a serve over counter
By jimbo22 in forum FundamentalsReplies: 0Last Post: 25-11-2009, 04:50 PM -
Thermo King OptiSet
By REEFER-TEK in forum TransportReplies: 4Last Post: 06-12-2007, 07:23 PM -
York/Bristol Condensing Unit
By Abe in forum CommercialReplies: 1Last Post: 03-02-2003, 07:46 PM -
Matching Evaporator with Condensing Unit
By Abe in forum Technical DiscussionsReplies: 12Last Post: 25-07-2001, 08:57 AM