Results 1 to 25 of 25
Threaded View
-
15-01-2010, 08:15 AM #1
Plate heat exchanger temperatures?
I have started doing work for a trout hatchery that cools the water with a plate heat exchanger and glycol. The chiller , that cools the glycol is only running at 58% capacity with glycol on temp at 7 C and off at 4 C. The water incoming temp is 18 C and off at 12 C. The hatchery water temp is slowly climbing and I need to sort it out. Would the above temps indicate a fouled heat exchanger which would be holding the chiller down to 58%. The glycol setpoint is 5.5 C.
Any advice would be appreciated.
Similar Threads
-
Some information on the aplication of suction gas/liquid line heat exchangers
By SteinarN in forum FundamentalsReplies: 5Last Post: 14-09-2009, 07:33 AM -
Brazed plate heat exchanger
By nh3simman in forum FundamentalsReplies: 4Last Post: 25-10-2008, 03:37 PM -
Fouled plate heat exchanger
By petrock in forum IndustrialReplies: 16Last Post: 12-07-2008, 10:11 AM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM