Results 1 to 13 of 13
Thread: Ideas for Brazing Gear
Threaded View
-
24-11-2009, 06:56 PM #1
Ideas for Brazing Gear
Hi All,
My 1st post, lets get this one going...
One thing in the trade espicially air con, there seems to be many people lost on what to do for brazing equipment!
Fed up of carrying those large oxy acetylene kits into awkward places, or just want to lighten the van load?
Well what is there for us? the only options i can see available are the following:
1. Turbo Set (nozzles are poor, wont do anything above 1/2 , 5/8 is pushing it!)
2. Rothenberger welding kit (i have had no experiance with this one but can olnly imagine the same problems as the turboset.)
3. Microflame brazing set (well all seems positive except for oxygen not lasting 5mins, and the obvious price tag around £400!)
Does anyone have any ideas?
As i say i believe this is an area not well covered by manufacturers!
Any help/opinions/advice would be greatly recieved
Justin
Similar Threads
-
need 12 volt car AC ideas
By ayaz in forum TransportReplies: 5Last Post: 24-07-2007, 03:39 AM -
Need ideas !!!
By zvikard in forum Technical DiscussionsReplies: 5Last Post: 17-08-2006, 08:34 PM -
bit of a pickle.. any ideas??
By mr cool (aus) in forum TransportReplies: 9Last Post: 05-05-2006, 05:35 AM -
Your opinions and ideas greatly appreciated for this project.
By fridg in forum Technical DiscussionsReplies: 0Last Post: 04-12-2005, 09:19 AM