Results 1 to 9 of 9
Thread: Oil Lines
Threaded View
-
22-06-2004, 10:36 PM #1
Oil Lines
Today I was told to use a 1/4 copper line for the oil preasure conection between the compressor and the oil switch instead of the plastic make your own line stuff used on the rest of the plant switches. I ask why and was told the oil line needs to be a bigger bore and false trips will occur if I use the plastic. I just wondered if any new if this is true
"It's better to remain silent and be thought a fool than open ones mouth and remove all doubt"
Similar Threads
-
temperatures of the suction and discharge lines
By VIXS in forum Air ConditioningReplies: 4Last Post: 17-05-2006, 07:18 AM -
Training time lines
By dogma in forum FundamentalsReplies: 1Last Post: 12-04-2006, 04:32 PM -
Liquid Line's Vibration
By JERRYCOOL in forum IndustrialReplies: 20Last Post: 21-03-2006, 01:49 AM -
Gas and liquid lines
By Carlo Hansen in forum FundamentalsReplies: 0Last Post: 19-07-2005, 03:54 PM -
R134a Capillary lines
By Latte in forum RefrigerantsReplies: 4Last Post: 06-02-2004, 08:04 PM