Results 1 to 7 of 7
Thread: MD 300 Thermo King
Threaded View
-
18-05-2009, 04:17 PM #1
MD 300 Thermo King
I have a MD300 that will come on intermittently, sometimes it shows Lost Conn. Sometimes it comes on and has a code 61, display reads 8 vdc. I got it to start once and it still showed 8 vdc. Everywhere I check voltage it is 12.6vdc. I have tried a new micro, display, display harness and relay board. Anyone have any ideas or ever see this before. The customer got it to run for 20 min or so today, then it just shut down and went blank.
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Thermo King SB 310 Manual
By Reefer tech in forum FundamentalsReplies: 1Last Post: 15-04-2010, 07:11 PM -
please help! thermo king wiring
By micki_kp in forum TransportReplies: 3Last Post: 17-11-2008, 08:59 AM -
Thermo King Refrigerant Help!
By jingua_ph in forum TransportReplies: 43Last Post: 12-04-2008, 01:19 PM -
Thermo King v? 00 MAX Tc Wiring Diagram
By Chris2005 in forum TransportReplies: 3Last Post: 01-02-2006, 08:01 AM