Results 1 to 4 of 4
Threaded View
-
02-04-2009, 08:28 PM #1
Air Energy Heat Pump for swimming pool
Hi all i have been asked by a friend to look at his heat pump ( An Air Energy 550Ti1 ) for his pool, it seems that when he sets the temperature to 32 degrees c, the monitor says 32 but the water temperature is actually 25 degrees c.
The system runs on R407C and the pressures are
70psi suction i presume and 300 discharge.
The water sensor seems fine.
Can anyone shed some light on why the water temperature is not reading what it says on the controlls.
Similar Threads
-
Design heat pump for a pool
By rolandh in forum Heat PumpsReplies: 10Last Post: 23-09-2010, 10:50 AM -
Pool heat pump water side diagram
By nike123 in forum Heat PumpsReplies: 23Last Post: 22-03-2009, 07:42 PM -
frostles heat pump
By Lc_shi in forum New TechnologiesReplies: 27Last Post: 31-03-2008, 07:53 AM -
swimming pool heat pump
By Andy AC in forum The Trail of TearsReplies: 8Last Post: 26-08-2007, 04:02 PM -
Thermal Efficiency of Refrigeration System
By hussain316 in forum Refrigeration BooksReplies: 5Last Post: 31-07-2007, 08:59 PM