Results 1 to 12 of 12
Thread: problems in high ambient
Threaded View
-
06-05-2008, 07:19 PM #1
problems in high ambient
hi
its not often we get nice weather here but the last couple o days have been belters and guess what? i am on bleedin call...anyway have 2 x 25 kw dx coolers condensers which are installed in a tight little compound below ground level and have trouble with short cycling when it hottish out...i.e trips on h/p..
the client is aware of this problem for a long time, however to it would be a job and a half to move condensers to a suitable location...might be a bit ify but i was thinking of installing a water supply spraying on to coils operated by a solinoid if the head pressure where to get to a certain pressure has anyone ever done anything like this or can anyone see any problems with it?
rgrds phil
Similar Threads
-
Compressor Pressures at High Ambient Air
By Andreas11 in forum Air ConditioningReplies: 16Last Post: 18-04-2008, 09:28 AM -
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
Air Cooled Mono Block Units & high Ambient
By smpsmp45 in forum Technical DiscussionsReplies: 4Last Post: 11-12-2007, 06:29 AM -
fun quiz
By Brian23 in forum New to REReplies: 6Last Post: 02-10-2007, 10:18 PM -
Suction pressure problems on TS units at low ambient temps
By nova in forum TransportReplies: 10Last Post: 18-03-2006, 07:35 PM